Replace Front Door by Pat Logan on Creators.com

Recently

Improve the Storage Capacity of Kitchen Cabinets Dear Pat: My house has just an average-size kitchen, and I am totally remodeling it. Do you have any guidelines for selecting or designing kitchen cabinets or counter areas for the most usable space? — Jennifer F. Dear Jennifer: Your question …Read more. Install Mirrors on Bedroom Closet Doors Dear Pat: The space near the dressing area in my master bedroom is not as bright as I would like. I thought about hanging a mirror somewhere, perhaps on the closet door. Will this really help my problem much? — Dee R. Dear Dee: Using mirrors …Read more. Clean Oil Stains From Concrete Driveway and Garage Dear Pat: We have a concrete driveway and garage floor. My husband likes to work on cars, and like most other things, he is not neat. How can I remove oil stains from the concrete and prevent future ones? — Agnes H. Dear Agnes: Men and their …Read more. How to Properly Level a Patio or Walkway Dear Pat: I am going to build a brick patio adjacent to a small fishpond in my backyard. I plan to use a gravel and sand base for the bricks. What is the easiest way to get them properly leveled? — Maria P. Dear Maria: A brick patio and …Read more.

Replace Front Door

Dear Pat: I have an old wooden front door with sidelights. The door is in bad shape and leaky, but the sidelights are fine. Is it possible to replace just the door and not the sidelights to save money? — Pamela A.

Dear Pamela: Front doors with decorative sidelights are very popular today. As you have found, the sidelights, which are fixed in the door opening, experience much less wear and tear than the door itself.

Even though the door looks bad now, inspect it carefully. It may just need some new weatherstripping seals, a coat of paint and perhaps some new hinges. The manufacturer of the door should be able to supply you with replacement seals and hinges. If not, most use standard sizes that you can find at home center stores. This would be your least expensive option.

Unless you posses better than average carpentry skills, it will be difficult to separate the door from the sidelights. They are usually sold as single unit and installed as a unit in the door opening. You may have trouble making adequate space and supporting a new door frame between the existing sidelights.

The decorative glass is often the most expensive part of front doors and sidelights. You might consider installing double doors instead of a single door with sidelights. These can look very stylish, and with smaller windows in each door, you will still get plenty natural lighting and perhaps have more privacy.

Although it looks as though your door is a perfect fit in the wall opening, there always is a gap all around the door/sidelight frame.

The door frame is shimmed in this gap and attached to the wall framing in several spots, not continuously. When there are no sidelights, each hinge has an extra long screw which reaches the wall framing. The door molding covers this gap.

There are several purposes for having a gap. It allows you, using the shims, to center and level the door if the house has settled or the wall opening is not true. It also ensures the weight of the house is resting on the wall framing and not the door frame. The door itself will shrink and grow with changes in the temperature and humidity level, so it needs a little room to move.

Luckily, single, double and sidelighted doors are usually made in standard sizes. Unless your house is very old, you should be able to find a replacement door/sidelight unit that will fit perfectly in the existing wall opening. When you order a new door, specify the wall opening dimensions, not the door frame dimensions.

Remove the door trim to get access to the gap around the door. If you remove the trim carefully, you may be able to reuse it on the new door. You will be able to find the locations of the nails or screws by looking for the shims. Try to remove the nails or screws from the door frame as they were driven in. If this is a problem, use a reciprocating saw to cut through them.

When you install your new door/sidelight unit, you might want to space it up slightly on a strip made of pressure-treated lumber. This will provide a little more clearance when the door swings open over carpeting or throw rugs.

Send your questions to Here's How, 6906 Royalgreen Dr., Cincinnati, OH 45244 or visit www.dulley.com. To find out more about Pat Logan and read features by other Creators Syndicate writers and cartoonists, visit the Creators Syndicate website at www.creators.com.