Install Wood Wainscoting by Pat Logan on Creators.com

Recently

Stop Annoying House Sounds Dear Pat: I have lived in a new house for about one year now. Whenever I use a lot of hot water or the furnace/air conditioner comes on, I hear squeaks and knocking sounds. What is it, and how can I stop it? — Gina P. Dear Gina: Those sounds …Read more. Buying a Ladder Dear Pat: I need to get some tools for my new home, and I think a ladder would be a good place to start? What are my options for ladders, and are different ones better for different tasks? — Polly M. Dear Polly: Selecting a ladder is about the …Read more. Install a Shower Enclosure Dear Pat: I am planning to remodel my bathroom. It has a shower, and I am limited on space, but my budget is open. What type of shower enclosure is best for a luxurious look and to make the room seem larger? — Cathy E. Dear Cathy: Remodeling a …Read more. Select Proper Wallboard Type Dear Pat: I am planning to do some projects around my new house. I am trying to decide if I should use plywood, medium density fiberboard, particleboard or oriented strand board. Which is best? — Stephanie P. Dear Stephanie: You must have …Read more.

Install Wood Wainscoting

Dear Pat: Much of the drywall has been nicked by my kids over the years. I would like to add wainscoting in the dining room instead of replacing the drywall. How can I do this myself to save a few bucks? — Wendy M.

Dear Wendy: Wood wainscoting is truly a beautiful wall treatment. Unfortunately, probably due to its high cost, it is not as common as it once was years ago. If you do install it in your dining room, I can guarantee it will get the most compliments of any feature from guests.

Real scratch-built wainscoting, as it was done years ago, was made of many small horizontal and vertical pieces that surround wood panels. These were made of solid wood so the individual pieces would expand and contract as the humidity level changed. This looked great when it was first installed, but the joints could become loose and open over time.

Today, wainscoting kits are available, and this would be your best option for a do-it-yourself project. The kits are not inexpensive, and some cost as much as $20 per square foot. By comparison, though, this is still less expensive than having a woodworker install scratch-built wainscoting.

Most wainscoting materials used today are made from engineered lumber. This is basically very high-grade plywood with a veneer of cherry, maple, walnut, oak, etc., on the top surface. With the plywood-type layers beneath the veneer, each piece is more stable than solid wood as the humidity level changes.

Most people stain the wood for a rich, warm, natural appearance. If you plan to paint the wainscoting, select a kit made with a lower-priced synthetic veneer.

This can also look very nice when finished in contrasting colors to the basic wall color.

For a completely unique design, you may be able to locate a local woodworking shop to make wainscoting pieces per your specific design. Expect this method to be very expensive. Hyde Park Lumber (www.hydeparklumber.com) and Elite Trimworks (www.elitetrimworks.com) offer standard wainscoting kits for do-it-yourselfers. Elite Trimworks sells small samples of patterns for $15 so you can actually see the pattern before ordering a complete kit.

When you determine the cost to do a room, keep in mind: Most people do not install wainscoting on all the walls. It actually looks better and more tasteful when just one or two walls are done. Plan on doing the plain walls without windows or doors because installing wainscoting around window openings takes some practice to fit properly.

The key to a quality installation of a wainscoting kit is accurately measuring the wall initially. Always measure twice to be safe. The wainscoting pieces can be glued or nailed directly over the old drywall, so you will not have to spend much time preparing the wall surface. Use a stud finder to locate the position of the wall stud. Make small marks on the wall above where the wainscoting will be installed.

Another important installation tip is to use a level to be sure the initial base rail is perfectly level. All of the other pieces and how well they fit together is based upon the base rail. Electrical outlets look best when they are located in one of the flat panels. This may require you to reposition an outlet or two.

Send your questions to Here's How, 6906 Royalgreen Dr., Cincinnati, OH 45244 or visit www.dulley.com. To find out more about Pat Logan and read features by other Creators Syndicate writers and cartoonists, visit the Creators Syndicate website at www.creators.com.