Design a Dining Area Without Creating a Separate Room by Pat Logan on Creators.com

Recently

Avoid Typical Electrical Wiring Errors Dear Pat: I just had a new two-car garage built, and I am remodeling the old one-car garage into a family room. I plan to do some of the wiring myself. What are some of the common wiring mistakes I should avoid? — Karen S. Dear Karen: If you …Read more. Add a New Front Door in the Old Doorjamb Dear Pat: My wood front door needs to be replaced, but I want to save some money and not remove the entire frame and jamb. What is the best way to install a new wood front door in the existing door frame? — Sissy M. Dear Sissy: The door itself …Read more. Remove and Replace a Damaged Ceramic Tile From a Floor Dear Pat: We have large ceramic tiles on the floor in our foyer. One of them has gotten badly scratched, and I need to replace it. What is the proper procedure to remove and replace one without damaging the other tiles? — Ronda S. Dear Ronda: …Read more. How to Properly Install a Leak-free Roof Dear Pat: I am having a major room addition to my house. In my past two houses, the shingle roofs leaked prematurely. What should I look for and discuss with the roofers to make sure this roof lasts longer? — Sandi M. Dear Sandi: Most roofs …Read more.

Design a Dining Area Without Creating a Separate Room

Dear Pat: We are designing our first house, and our budget will limit the floor space. My husband and I are debating whether or not we need a dining room. What are methods to incorporate the dining area into the kitchen? — Janet B.

Dear Janet: Many homes are built today without a formal dining room. One of the key reasons is people are building smaller homes. For many, the construction budget is the size-limiting factor. For others, a desire to be more energy efficient gives them an incentive to design smaller homes that use less resources.

Think about the past several parties you have attended or at home with your own family. People generally end up in the kitchen, not in the dining room, even if dinner was served in the dining room.

From a floor plan design standpoint, it might be a better idea to build a larger kitchen and incorporate the dining room area into it or into an adjacent room. This can save quite a bit of floor space, reduce construction costs and improve the functionality of your dining/kitchen area.

Another advantage of combining the kitchen and dining room areas is for the enjoyment of the cook. With the combined open area, the cook can be a part of the activities of the guests or family members. Remember how your mother likely was tucked away in a kitchen and really only mingled with your guests after the dinner was served.

There are several simple design methods to create a separate dining area without erecting walls. One method is to change the flooring material between the kitchen and dining areas. This often is enough of a change to indicate the two areas are designated for different uses.

Using hardwood floors lends itself well to accomplish the change in the flooring appearance.

If your budget is tight, laminate floor can be used in the same way. The colors do not have to be significantly different. Often just a change in the pattern is adequate to distinguish the two areas. Installing flooring with a decorative border in one of the rooms also helps.

Another option is installing a ceiling alcove. This is a relatively inexpensive design feature, and it can enhance the appearance of both rooms. It also provides a good location to add some recessed lighting.

Different lighting levels in the two areas can also indicate they are for different purposes. Install separate wall controls for the lights shining into each room so the intensity can be varied. The dining area is generally not lighted as brightly as the kitchen.

If you are planning to add a fireplace — gas or wood-burning — to your home, install it between the kitchen and dining areas. Install a relatively small one so there is plenty room to walk and see around either side of it. Smaller ones are also less expensive. If you install a gas fireplace, consider a see-through, two-sided model.

A final design option is a half wall with slats between the two areas. When sitting in a chair, it should be about head height. From a distance, it is easy to see activity through the slats. When sitting in the chairs along the half wall and looking across the slats along the length of the wall, it provides a sense of privacy.

Send your questions to Here's How, 6906 Royalgreen Dr., Cincinnati, OH 45244 or visit www.dulley.com. To find out more about Pat Logan and read features by other Creators Syndicate writers and cartoonists, visit the Creators Syndicate website at www.creators.com.